Medical laboratory centrifuge OPN-3.04

Clinical laboratory centrifuge OPN-3.04 portable, periodic. Designed for practical use in laboratory clinical diagnostics for separation into fractions of heterogeneous liquid systems with a density of up to 2 g / cm3 under the influence of centrifugal forces.

The medical centrifuge OPN-3.04 provides for the installation of the test tube holder rotation speed in steps of 1000, 1500, 3000 rpm with a light signaling of the set rotation speed step.

The permissible deviation of the set rotation speed is not more than ± 150 rpm at frequencies of 1000 and 1500 rpm and minus 400 rpm at a rotation speed of 3000 rpm. The time for establishing the operating mode and the braking time is no more than 3 minutes.

The OPN-3.04 benchtop centrifuge is equipped with a 24-seater test tube holder and protective locks:

1. enable rotation of the tube holder with the lid open;
2. opening the lid until the tube holder stops completely.>

The test tube holder is designed to work with vacuum tubes with a capacity of 1.7 to 10 ml. In this case, it is possible to simultaneously install tubes: - 12 pcs with a capacity of 1.7 to 5 ml (diam.13 mm) and 12 pcs with a capacity of 7 to 10 ml (diam.16 mm).

Laboratory centrifuges of TNK Dastan JSC have passed the full cycle of tests and examinations of the Ministry of Health of Ukraine, are included in the register of medical equipment and are approved for use in medical practice. The presence of the registration certificate of the Ministry of Health guarantees the effectiveness and safety in the use of medical equipment.

Products are certified according to the international quality standard ISO 9001: 2008.